The most important feature of the machine’s structural design is that X – sense movement  is executed by the table composing one single unit with the rotary table. All other movements  are performed by the main spindle. This is the so-called  travelling-column design. The headstock built in  the column  performs , together with the latter,  the drilling-like movements as Z (W) axis as well as the vertical movement along Y axis.

The column rests on Z machine bed and travels on the Z-axis guideways. The workpiece performs in its full mass the movement in X direction with B axis on the rotary table. The X slide  in its full mass together with the rotary table and workpiece rests on X bed and guidways over the entire stroke length, resp. ensuring workpiece stability even at max. load.

---

Standard Design

• All main assemblies made of cast-iron.
• Main spindle design  to  tool  clamping ISO 50 DIN,
• Tool clamping, draw-in bolt MAS II BT 50 x30pcs)
• Main spindle cooling (oil cooling unit),
• Through-the-spindle cooling (15bar)
• Low pressure, round-the-spindle coolant system,
• Quill (W axis motion) ( drilling spindle support L=250mm)
• Back gear, 2-stage gear box, low-high speeds, automatic speed range selection,
• X/Y/Z-axis measurement by means of rules, (standard),
• B-axis, (with backlash-free worm-worm gear drive)
• Guideway protection along X-, Z-axis with sliding cover,
• ATC – Automatic tool changer with tool magazine, 60 tool pockets
• Hydralic system (tool clamping, table clamping, hydraulic counterweight, etc.),
• Central slide lubrication system,
• Electric cabinet, enclosed design
• Transformer, 55KVA (415V, 50/60Hz, 3-phase,)
• Air-conditioning for electric cabinet
• Workpiece lighting,
• Rotatable control panel,
• Chip disposal round he table,
• Chip conveyor and chip- collector cart,
• Coolant cleansing and controlling unit
• Actuating electronics: FANUC package, (control, drive electronics, main and feed motor with integrated measuring system),
• Control system FANUC 0iMF, number of controlled axes 5, (number of simultaneously controlled axes: 4),
• Technological support, MANUAL GUIDE,
• Rigid tapping,
• Remote FANUC handwheel (MPG) for  workpiece setting
• Data input: Ethernet, USB, SRAM card connection,
• Manual , mechanical and electrical documentation,
• Foundation items, hand-tools for commissioning,
• CE-conform machine design, certificate,

Technical parameters click here